warema_2035145_alhb_en_v2•2021-04-01
We reserve the right to make technical modifications
12
WMS WebControl pro
4 Calling up in the browser
The WMS network is ready for operation once all the components in the
WMS network have been connected via WMS studio pro and are supplied
with power.
Call up WMS WebControl pro from a PC in the same WLAN from the brows-
er: enter "http://webcontrol" into your browser address bar.
The WMS WebControl pro interface appears.
If the interface does not appear, the router has not recognised the
web address of the WMS WebControl pro. Read the IP address (e.g.
192.168.0.100) of the WMS WebControl pro from the client table for your
router (router handbook). Enter this number into your browser address bar.
5 Installing the WMS WebControl pro app
Separate apps are available free-of-charge for both iOS and Android devices.
In the App Store/Google Play Store, download the WMS WebControl pro
app onto the devices via which you want to access the WMS WebControl
pro.
Android iOS
Browser and app
To Next Page
Loading...
