warema_2035145_alhb_en_v2•2021-04-01 We reserve the right to make technical modifications
23
8.2 Operation
The user interface is identical for all apps:
The rooms are at the higher level.
Each room is assigned channels and scenarios (shown as tiles below the
room concerned).
Each channel can contain one or more receivers. Receivers can also be
assigned multiple channels.
8.2.1 Operating the products
Select a room from the Operation tab.
All channels and scenarios are shown as tiles. Where available, the tiles
show the states of the receivers in the channel.
Click on a tile to expand.
The first receiver found in the channel is displayed with its operating ele-
ments and current position. There is also a stop button and a button for se-
lecting the control modes for the channel.
Operate product/activate scenario.
Operation
To Next Page
Loading...
