warema_2035145_alhb_en_v2•2021-04-01
We reserve the right to make technical modifications
26
WMS WebControl pro
8.3 Control modes
In the control mode tab, the control functions can be enabled or disabled for
each receiver individually. The switching times can also be edited, added or
removed for the time switch.
The View tile allows the safety control functions (wind, precipitation, ice) to
be displayed. You should only make changes here if you understand how
the control mode works and are familiar with the effects on the safety of the
products in the channel concerned.
8.3.1 Sun
The sun control prevents rooms from overheating during the summer and
allows glare-free working without manual intervention.
This function requires a WMS Weather station or a WMS Photo sensor.
8.3.2 Wind
The wind monitoring function protects the external sun shading system and
windows from being damaged by high wind loads.
This safety function is highly recommended for all external sun shading prod-
ucts and windows.
Control modes
To Next Page
Loading...
