Warmup Element - Technical Specifications

16
Model RSW-01-XX-YY
Operating Voltage 230 V AC : 50 Hz
Protection Class Class II
Max. Load 16A (3680W)
Rated impulse voltage 4000V
Automatic action 100,000 cycles
Disconnection means Type 1B
Pollution degree 2
Max. Ambient Temperature 0 - 40°C
Relative Humidity 80%
IP Rating IP33
Dimensions (Assembled) 90 x 115 x 39 mm
Screen size 3.5in
Sensors Air & Floor (Ambient)
Sensor Type NTC10k 3m Long (Can Be Extended To 50m)
Operating Frequency 2401 - 2484MHz
Max. Radio-Frequency Power
Transmitted
20dBm
Installation Depth
Recommended: 50 mm Back Box
Minimum: 35 mm Back Box
Compatibility
Electric, Hydronic Underoor Heating. Max.
16A (3680W)
Central Heating Systems
(Combi & system boilers with switch live,
230V AC input)
Er-P Class IV
Warranty 12 Years
Approvals BEAB
NOTE: Hereby, Warmup plc, declares that the radio
equipment type RSW-01-XX-YY is in compliance with
the RED Directive 2014/53/EU and Radio Equipment
Regulations 2017. The declarations of conformity
may be consulted by scanning the QR Code or visiting
www.literature.warmup.co.uk/d-o-c/element.
Instructions for Disposal
Do not dispose of the device with regular domestic waste! Electronic
equipment must be disposed of at local collection points for waste electronic
equipment in compliance with the Waste Electrical and Electronic Equipment
Directive.
Technical Specications