Warmup Element - Settings; Date and Time Configuration; Thermostat Application Selection; Sensor and Limit Settings

12
Settings
21.0
Date and time
6-5-2021
13:00
Set the current date and time.
Press
to begin, press / to change date/
time. Press
to conrm.
Thermostat application
3
See Table 1.0 Thermostat Application.
Press
/ to change application. Press to
conrm
1
10K
Change Control Sensor Probe 1 (5 & 6) type.
Set between 5, 10, 12, 15, 100K sensor settings.
2
10K
Change Limit Sensor Probe 2 (6 & 7) type.
Set between 5, 10, 12, 15, 100K sensor settings.
35.0°
Set Air limit
35.0°
Set Floor limit
Set display brightness
4
Set active brightness
2
Day standby brightness
2
Night standby brightness