Need help?Do you have a question about the Waters ACQUITY Isocratic Solvent Manager and is the answer not in the manual?
General| Type | Isocratic Solvent Manager |
|---|---|
| Gradient Formation | Not applicable (isocratic system) |
| Gradient Delay Volume | Not applicable (isocratic system) |
| Flow Precision | <0.075% RSD |
| Pressure Range | Up to 15, 000 psi (1, 034 bar) |
| Solvent Compatibility | Compatible with all common HPLC solvents |
| Temperature Range | Not applicable |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Solvent Capacity | 2 bottles, 1 L each |
Diagram and list identifying the main components of the Isocratic Solvent Manager (ISM).
Step-by-step procedure for installing the optional leak sensor for leakage detection.
Procedures for priming the Isocratic Solvent Manager (ISM) when first used or after idle periods.
Guidance on performing maintenance procedures when components malfunction or during routine checks.
Information on how to contact Waters technical service for support and troubleshooting.
Procedure for removing and replacing seals on the primary pump head.
Procedure for removing and replacing seals on the accumulator pump head.
To Next Page