Need help?Do you have a question about the Waters ACQUITY UPLC M-Class and is the answer not in the manual?
General| System Type | Ultra Performance Liquid Chromatography (UPLC) |
|---|---|
| Maximum Pressure | 15, 000 psi (1034 bar) |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Flow Rate Range | 0.001 to 2.0 mL/min |
| Column Temperature Range | 4°C to 90°C |
| Sample Capacity | 384-well |
| Detector Type | FLR |
| Injection Volume | 0.1 µL |
| Detection Wavelength Range | 190 to 800 nm (depending on detector) |
| Dimensions | Varies depending on configuration |
| Weight | Varies depending on configuration |
Examples of system stack configurations based on core modules and module types.
Describes the system components and their functions based on installed modules.
Details the Auxiliary Solvent Manager (ASM) pump, its capabilities, and configuration.
Explains the µSample Manager - Fixed Loop (µSM-FL) for sample injections and thermal control.
Recommends practices for achieving more reproducible chromatography.
Provides guidelines for microscale UPLC system performance.
Details how to minimize contamination of sample preparation tools and bottles.
Explains how to prevent leaks by properly tightening system fittings.
Outlines steps for preparing the system for operation, including powering on hardware and software.
Details how to configure system software, including MassLynx and driver packs.
Guides on launching and using the instrument console software.
Explains how to monitor and control system modules via control panels.
Provides contact information and required details for Waters Technical Service.
Lists periodic maintenance schedules for optimal system performance.
Guides on systematically troubleshooting system malfunctions.
Lists where to find information on Waters Quality Parts and compatible accessories.
Explains warning symbols that alert to risks like death, injury, or adverse reactions.
Highlights the requirement for personal protective equipment like eye protection and gloves.
Warns about bursting nonmetallic tubing under pressure and precautions.
Lists general warnings applicable to all Waters instruments and devices.
Lists performance specifications for the ACQUITY UPLC M-Class system and components.
Lists instrument control specifications for the ACQUITY UPLC M-Class system.
Lists physical specifications for individual ACQUITY UPLC M-Class system components.
Shows the process waste flow for a system stack on a micro cart.
Illustrates example process waste management and external wiring connections.
Explains the requirement for a separate, grounded power source for each module.
Provides general information and warnings regarding solvent use.
Lists recommended solvents for the ACQUITY UPLC M-Class System.
Provides recommendations for operating with neutral or basic mobile phases.
Explains how cleaning the system kills and removes residual bacteria.
To Next Page