Watson-Marlow 620DuN - Dimensions

112 pages

Save Page as PDF

To Next Page

To Previous Page

Watson-Marlow 620DuN and 620Du User Manual 13

Drive only + 620R, 620RE + 620RE4 + 620L, 620LG

IP31 16.5kg, 36lb 6oz 19.6kg, 43lb 3oz 20.1kg, 44lb 5oz 24.3kg, 53lb 9oz

IP66 NEMA 4X 17.4kg, 38lb 6oz 20.5kg, 45lb 3oz 21.0kg, 46lb 5oz 25.2kg, 55lb 9oz

Unit weights

8.2 Dimensions

Main Page

Table of Contents1
Declaration of Conformity3
Declaration of Incorporation3
Five-Year Warranty3
When You Unpack Your Pump4
Information for Returning Pumps5
Peristaltic Pumps - an Overview5
Safety Notes6
Pump Specifications8
- Pressure Capability12
- Dimensions13
Good Pump Installation Practice14
- General Recommendations14
- Do's and Do Not's15
Connecting this Product to a Power Supply16
Start-Up Check List17
Switching the Pump on for the First Time17
Switching the Pump on in Subsequent Power Cycles (if Not in Auto-Restart Mode)19
Manual Operation20
- Keypad Functions20
- Speed22
- Direction22
- Keypad Lock23
- Keypad Beep23
- Manual Operation and Remote Digital Inputs and Outputs23
- Backlight24
- Auto-Restart24
Main Menu25
- Keypad Functions in Menu Screens25
- Main Menu Entry25
Pin-Secure Process Protection27
Head and Tubing Calibration28
Setup31
- Trim32
- Analogue33
- Input 1: Speed34
- Scaling - Stroke35
- Trim36
- Exit36
- Display36
Pump I/D37
Baud38
Stop Bits38
Xon/Xoff38
Flow Units39
Run Time40
Outputs40
Remote Stop42
Auto-Restart43
Set Maximum Allowed Speed44
Set Minimum Allowed Speed44
Scrolling45
Date and Time45
Backlight46
Rom46
Language47
Defaults47
Beep48
Security Code49
Exit50
Pin out Details50
Memodose52
Changing Dosing Speed53
Footswitch Operation and Other Remote Inputs and Outputs with Memodose54
Exit54
Automatic Control Wiring Using the 620N Module55
Module Removal and Replacement55
Wiring up56
Speed: Analogue Input59
Scaling: Analogue Input60
Speed: Analogue Output61
Tachometer Frequency Output61
Run/Stop Input62
Direction Input62
Auto / Manual Toggle Input63
Memodose Input63
Leak Detection Input63
Outputs64
- Supply Voltages64
- RS485 Input65
- Speed: Analogue Input 168
- Scaling: Analogue Input 269
- Pump Status Outputs74
- Logic Output 174
- Logic Output 275
- Logic Output 376
- Logic Output 476
- Supply Voltages77
Automatic Control and Operation78
Network Control and Operation80
RS232 and RS485 Command Strings82
Troubleshooting83
- Error Codes84
Drive Maintenance85
Drive Spares85
- RE, 620RE4 and 620R Key Safety Information86
- RE, 620RE4 and 620R Safe-Guarding86
- RE, 620RE4 and 620R Pump Installation87
- RE, 620RE4 and 620R Pumping Conditions87
- RE, 620RE4 and 620R General Operation88
- RE and 620RE4 Tube Element Loading89
- R Continuous Tube Loading90
- Continuous Tube Removal91
L and 620LG Key Safety Information102
L and 620LG Pumpheads102
- L and 620LG Pumping Conditions103
- L and 620LG Removal and Installation103
- L and 620LG Tube Loading105
- L and 620LG Care and Maintenance106
- L and 620LG Track Adjustment106
- L and 620LG Pumphead Spares107
- L and 620LG Flow Rates108
- L and 620LG Performance Data108
- L Tubing Codes109
- LG Element Codes110
- Pumping Accessories110
- Publication History111
- Warning Not to Use Pumps in Patient-Connected Applications111
Trademarks111
Decontamination Certificate112

Watson-Marlow 620DuN - Dimensions

Table of Contents

Related product manuals