Watts Aerco INN 1060N - Page 118

Innovation - Edge [i] Installation, Operation, Maintenance Manual
CHAPTER 8 – WATER HEATER MANAGEMENT
OMM-0143_A • GF-216 • 9/6/2019 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 118 of 170
TABLE 8-6b: WHM Cascade → Cascade Communication Parameters
Max Address)
WHM On Timeout
15 Sec
300 Sec
60 Sec
WHM Manager only – Specifies the time the WHM Manager must wait for a Client unit to turn
on.
WHM MANAGER SCREEN
Figure 8.6-2: Cascade Communication Screens
TABLE 8-6c: WHM Cascade → Application Configuration Parameters
Menu Item Display
Available Choices or Limits
Default
Minimum
Maximum
Application
Read Only
DHW
Specifies the application for the entire WHM Cascade.
Operating Mode
Read Only
Constant Setpoint
Specifies the operating mode for the entire WHM Cascade.
WHM Setpoint
60°F
150°F
120°F
Specifies the Setpoint for the entire WHM Cascade.
WHM CLIENT SCREEN