Watts Vision BT-A02 RF - One (or Several) Electrical Heaters (1 Zone)

26 27
For a correct installation, refer to dedicated user guides of each product, then:
WIRING CONNECTION:
• Connect each receiver (BT-FR02 RF, BT-PR02 RF and/or BT-WR02 RF) to
related electrical device
VIRTUAL – RF CONNECTION:
1 Pair the thermostat to the receiver
2-3-4 In case of several receivers e linked to the same thermostat, make
again the operation above for each receiver
3.3.2 One (or several) electrical heaters (1 zone).
Equipments:
• 1 Thermostat BT-D02 RF (or BT-A02 RF or BT-DP02 RF)
• Several Receivers: BT-FR02 RF, BT-PR02 RF or BT-WR02 RF
BT-D02 RF
BT-PR02 RF
BT-FR02 RF
29
For a correct installation, refer to dedicated user guides of each product, then:
WIRING CONNECTION:
• Connect each receiver (BT-FR02 RF, BT-PR02 RF and/or BT-WR02 RF) to related electrical
device
VIRTUAL – RF CONNECTION:
1 Pair the thermostat to the receiver
2-3-4 In case of several receivers e linked to the same thermostat, make again the operation
above for each receiver
29
For a correct installation, refer to dedicated user guides of each product, then:
WIRING CONNECTION:
• Connect each receiver (BT-FR02 RF, BT-PR02 RF and/or BT-WR02 RF) to related electrical
device
VIRTUAL – RF CONNECTION:
1 Pair the thermostat to the receiver
2-3-4 In case of several receivers e linked to the same thermostat, make again the operation
above for each receiver
29
For a correct installation, refer to dedicated user guides of each product, then:
WIRING CONNECTION:
• Connect each receiver (BT-FR02 RF, BT-PR02 RF and/or BT-WR02 RF) to related electrical
device
VIRTUAL – RF CONNECTION:
1 Pair the thermostat to the receiver
2-3-4 In case of several receivers e linked to the same thermostat, make again the operation
above for each receiver
29
For a correct installation, refer to dedicated user guides of each product, then:
WIRING CONNECTION:
• Connect each receiver (BT-FR02 RF, BT-PR02 RF and/or BT-WR02 RF) to related electrical
device
VIRTUAL – RF CONNECTION:
1 Pair the thermostat to the receiver
2-3-4 In case of several receivers e linked to the same thermostat, make again the operation
above for each receiver
29
For a correct installation, refer to dedicated user guides of each product, then:
WIRING CONNECTION:
• Connect each receiver (BT-FR02 RF, BT-PR02 RF and/or BT-WR02 RF) to related electrical
device
VIRTUAL – RF CONNECTION:
1 Pair the thermostat to the receiver
2-3-4 In case of several receivers e linked to the same thermostat, make again the operation
above for each receiver
BT-WR02 HC RF
BT-WR02 HC RF