Wavecom FASTRACK M1306B - 4 Basic Features and Services; Table 3: Basic Features of the M1306 B

Fastrack M1306B User Guide
Basic Features and Services
confidential © Page: 25 / 65
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged
without prior written agreement.
WM_PRJ_M13_UGD_001 -003 November 11, 2006
4 Basic Features and Services
Basic features of the M1306B and available services are summarized in the table
below.
Table 3: Basic features of the M1306B
Features GSM DCS
Open AT
®
Open AT
®
programmable:
Native execution of embedded standard ANSI C applications,
Custom AT command creation,
Custom application library creation,
Standalone operation.
Standard 900 MHz.
E-GSM compliant.
Output power: class 4 (2W).
Fully compliant with ETSI
GSM phase 2 + small MS.
1800 MHz
Output power: class 1 (1W).
Fully compliant with ETSI GSM
phase 2 + small MS.
GPRS Class 10.
PBCCH support.
Coding schemes: CS1 to CS4.
Compliant with SMG31bis.
Embedded TCP/IP stack (optional).
Interfaces RS232 (V.24/V.28) Serial interface supporting:
 Baud rate (bits/s): 300, 600, 1200, 2400, 4800, 9600,
19200, 38400, 57600, 115200,
 Autobauding (bits/s): 2400, 4800, 9600, 19200, 38400,
57600.
2 General Purpose Input/Output gates (GPIOs) available.
3 V SIM interface.
AT command set based on V.25ter and GSM 07.05 & 07.07.
Open AT
®
interface for embedded application.
SMS Text & PDU.
Point to point (MT/MO).
Cell broadcast.