Wavecom Technical data M1306B - Basic Features and Services; GSM and DCS Band Capabilities; Interface and Protocol Support; SMS, Data, and Fax Services

WM_PRJ_M13_UGD_001 - 001
20th July 2004
© 2004
All rights reserved
Wavecom Confidential & Proprietary Information
Page: 20 / 55
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged
without prior written agreement.
4 Basic features and services
Basic features of the modem and available services are summarized in the table
below.
Features GSM DCS
Standard 900 MHz.
E-GSM compliant.
Output power: class 4 (2W).
Fully compliant with ETSI GSM
phase 2 + small MS.
1800 MHz
Output power: class 1 (1W).
Fully compliant with ETSI GSM
phase 2 + small MS.
GPRS Class 10.
PBCCH support.
Coding schemes: CS1 to CS4.
Compliant with SMG31bis.
Embedded TCP/IP stack (optional).
Interfaces RS232 (V.24/V.28) Serial interface supporting:
! Autoshutdown controlled by software (AT),
! Baud rate (bits/s): 300, 600, 1200, 2400, 4800, 9600,
19200, 38400, 57600, 115200,
! Autobauding (bits/s): 2400, 4800, 9600, 19200, 38400,
57600.
2 General Purpose Input/Output gates (GPIOs) available.
3 V SIM interface.
AT command set based on V.25ter and GSM 07.05 & 07.07.
OpenAT interface for embedded application.
SMS Text & PDU.
Point to point (MT/MO).
Cell broadcast.
Data Data circuit asynchronous.
Transparent and Non Transparent modes.
Up to 14.400 bits/s.
MNP Class 2 error correction.
V42.bis data compression.
Fax Automatic fax group 3 (class 1 and Class 2).