WM_PRJ_M13_UGD_001 - 001
20th July 2004
© 2004
All rights reserved
Wavecom Confidential & Proprietary Information
Page: 30 / 55
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged
without prior written agreement.
5.9 Firmware upgrade procedure
The firmware upgrade procedure is used to update the firmware embedded into
the FASTRACK modem.
That procedure consists in downloading the firmware into internal memories
through the RS232 serial link available on the SUB-D 15-pin connector.
Refer to document [2] for a detailed description of that procedure.
To Next Page
Loading...
