WM_PRJ_M13_UGD_001 - 001
20th July 2004
© 2004
All rights reserved
Wavecom Confidential & Proprietary Information
Page:
52
/
55
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged
without prior written agreement.
8.4 Conformity
The complete product complies with the essential requirements of article 3 of
R&TTE 1999/5/EC Directive and satisfied the following standards:
Domain Applicable standard
Safety standard EN 60950,
Efficient use of the radio frequency
spectrum
EN 301 419-1 / EN 301 511,
EMC EN 301 489–1 / EN 301 489-7.
Global Certification Forum – Certification
Criteria
GCF-CC V3.13
8.5 Protections
8.5.1 Power supply
The modem is protected by a 2.5 A / 250 V fuse directly bonded on the power
supply cable.
The model of fuse used is: FSD 2.5 A / 250 V FAST-ACTING.
8.5.2 Overvoltage
The modem is protected against voltage over +32 V.
When input voltages exceed +32 V, the supply voltage is disconnected in order
to protect the internal electronic components from an overvoltage.
8.5.3 ESD
The modem withstands ESD according to IEC 1000-4-2 requirements for all
accessible parts of the modem except the RF part:
!
10 kV of air discharge,
!
5 kV of contact discharge.
8.5.4 Miscellaneous
Filtering guarantees:
!
EMI/RFI protection in input and output,
!
Signal smoothing.
To Next Page
Loading...
Need help?
General
