Webasto Next - 13 Settings; 14 Operation

13 | Settings
16 / 23 5111232C OI-II Webasto Next_EN
13 Settings
NOTE
Setting the Webasto Next
You can adjust the settings of your Webasto Next using
the following options:
For installation:
● Webasto Charger Setup app
For operation and setting:
● Webasto ChargeConnect portal
● Webasto ChargeConnect app
● Integrated WebUI (configuration interface, see
chapter9, "WebUI" on page 12)
13.1 Dim LED indicator
WCH000072A
To dim the LED display of your Webasto Next, using the
Webasto ChargeConnect Portal (WCC) (https://
webastochargeconnect.com/) and follow the instructions.
Available from Q2, 2022.
14 Operation
14.1 overview
WEM000107A
1
4
3
2
Fig.21
1 LED indicator
2 Charging cable holder
3 Charging coupling holder
4 Installation cover
14.2 LED indicators
14.2.1 LED operating indicator
WEM000077B
Fig.22
Operating
indicator
Description
N1 LED not lit:
Charging station is off.
N2 White chase light running up and down:
Charging station is starting up.
N3 LED pulsing white:
Communications UI is starting.
N4 LED is green:
Charging station is on standby.
N5 LED pulsing blue:
Charging station being used; charging vehicle.
N6 Blue chase light running up and down:
Charging coupling connected to the vehicle,
charging interrupted.
N7 Green chase light running up and down:
The charging station is in operation but the "Scan
& Charge" function is locked.
N8 Orange chase light running up and down:
Charging process interrupted by power supply
company.
Table3: Indicator lamps