What to do if Webasto Heater does not start because of high coolant temperature?
If your Webasto Heater doesn't start, and the coolant temperature is too high, this is normal. The heater will not start until the coolant temperature is below 68 °C (155 °F).
General| Type | Air Heater |
|---|---|
| Fuel | Diesel |
| Dimensions | Varies by model |
| Voltage | 12V or 24V |
| Application | School Buses |
| Installation | Underfloor |
Guide to operating the Webasto Scholastic Series heater.
Procedures for installing the Webasto Scholastic Series heater.
Emphasizes observing general safety regulations and specific safety notes for accident prevention.
Step-by-step instructions and considerations for securely mounting the heater tray.
Guidelines for connecting the exhaust pipe, ensuring safe routing and preventing fume entry.
General information on integrating the heater into the vehicle's coolant system for efficient heating.
Detailed steps for connecting the power harness to a constant power source with safety cautions.
A checklist to complete before the initial start-up and operation of the installed heater.
Procedures to ensure the heater starts, runs, and provides warm air, and that the timer functions correctly.
Outlines the annual maintenance procedures required to keep the heater in optimal working condition.
A matrix to help diagnose problems by correlating issues with potential causes and necessary actions.
Instructions on how to reset the heater after a lockout condition occurs.
Details the terms and conditions of the limited non-transferable warranty for Webasto heaters.
To Next Page