Webasto Thermo Top Evo 5+ - Mounting Heater; Hole in bumper; Mounting bolt; Loosely mounting heater

Mercedes Benz C-Class S204, W204, C204 / GLK-Class X204
Ident. No.: 1315959G_EN Status: 31.01.2013 © Webasto Thermo & Comfort SE
16
Figure shows W204 with daytime running
light.
Remove heater. If vehicles have front fog
light, this must be removed for the hole.
1 7 mm dia. hole
Hole in
bumper
Figure shows W204 with daytime running
light.
Install horn
3 with original vehicle bolt 1.
2 M6x20 bolt,pin lock
Mounting
bolt
Mounting Heater
Figure shows W204 with daytime running
light.
Mount bracket of heater
1 on bolt 3, insert be-
tween detached bracket and bumper. Align
heater and fasten at position
4 and 6.
Tighten original vehicle bolt at position
5.
Tighten bolt
4 on retaining strut.
2 Flanged nut
6 M6x20 bolt, flanged nut
Mounting
heater
Figure shows X204 with front fog light.
Mount bracket of heater
1 on bolt 3 between
detached bracket and bumper. Insert 8 mm
shim between bracket of heater and frame
side member at position
4. Align heater and
fasten at position
4 and 3. Tighten bolt on re-
taining strut.
2 Flanged nut
4 M6x20 bolt, 8 mm shim, flanged nut
Mounting
heater
30
1
31
2
1
3
32
2
3
1
5
6
4
33
2
3
1
4