Webasto Thermo Top Evo 5+ - Petrol Fuel Standpipe; Cutting standpipe to size; Mounting fuel standpipe

Mercedes Benz C-Class S204, W204, C204 / GLK-Class X204
Ident. No.: 1315959G_EN Status: 31.01.2013 © Webasto Thermo & Comfort SE
23
Petrol Fuel Standpipe
Version 1
Remove fuel-tank sending unit 1 in accord-
ance with manufacturer's instructions. Watch
drilling chips while drilling.
Mount large diameter washer 2 outer dia. = 17.6mm,
copy 6mm dia. hole pattern.
3 6 mm dia. hole
Fuel ex-
traction
Cut standpipe 1 at an angle.
2 Section, discard
Cutting
standpipe
to size
Observe tightening torque 5 Nm of flanged
nut
6 on fuel standpipe 7.
Mount 3.5 mm dia. moulded hose
4 on fuel
standpipe
7.
1 Fuel-tank sending unit
2 Standpipe
3 10 mm dia. clamp
5 8 mm dia. clamp
Mounting
fuel stand-
pipe
Mount fuel-tank sending unit 4 in accordance
with manufacturer's instructions.
Mount 3.5 mm dia. hose 1 on fuel standpipe 3 .
2 8 mm dia. clamp
5 6x11 hose (rattle protection)
6 Fuel line
7 10 mm dia. clamp
Mounting
wire
54
1
3
2
55
2 1
145
56
1
6
5
7
4
3
2
57
5
4
3
2
6
1
7