25
Change hydraulic uid lter
Drain hydraulic oil.
Remove the protective grating (1).
Unscrew the hydraulic oil lter (2).
Lightly oil the rubber seal of the hydraulic oil lter.
Screw on new hydraulic oil lter.
Only hand tighten the hydraulic uid lter.
Top up hydraulic liquid.
Check the hydraulic uid level in the view glass (1).
If lubricating oils and fuel come into contact with skin, they
can cause skin cancer. Upon contact with the skin, clean
aected skin with suitable cleaning agent without delay.
Wipe up/o oil slick and oil residue and dispose of fuel-
soaked cleaning cloths in an environmentally responsible
manner.
All maintenance work: Select a collection vessel that is
large enough to prevent oil from spilling onto the ground.
Dispose of waste oil in an environmentally friendly manner
(regulation on waste oils).
Check the hydraulic oil level when the machine is at ope-
rating temperature. The correct oil level is reached when
the oil is in the middle of the view glass.
1
1
2
To Next Page
Loading...