EasyManua.ls Logo

Weber mt SRV 590 - Activities Prior to Starting Work; Transport, Loading, and Checks

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12 SRV 590
1
1
1
Transport
Activities prior to starting work
When transporting the tamper on a vehicle, secure it
with suitable restraints.
Fit the crane hook into the lifting ring (1) and lift the machine
onto the desired means of transport.
Loading with crane
Only use lifting machines with a minimum bearing
capacity of 100 kg.
Do not step under suspended loads.
The correct oil level is between the min. and max. marks.
Check the engine oil level
Pull the oil dip stick (1) out of the crankcase.
max.
min.
Open and remove the gas cap (1), check the level,
if necessary top off to the lower edge of the ller neck
with clean fuel in accordance with the specication.
Check the fuel level
Carefully wipe up spilled fuel.
If lubricating oils and fuel come into contact with skin, they
can cause skin cancer. Upon contact with the skin, clean
affected skin with suitable cleaning agent without delay.
For work at the fuel system, have a suitable re-extin-
guishing agent at the ready.
Fire, naked light, and smoking is forbidden!
UPPER LEVEL
LOWER LEVEL

Related product manuals