SRV 590 9
Device description
The series SRV 590 tamper is used for road-building, canal construction, pipe laying and landscaping
compaction tasks.
Drive
The tamper is powered by an air-cooled Honda gasoline engine.
Force is transmitted via the centrifugal clutch directly to the tamping system. The compaction work
is performed by the tamping foot.
The engine is protected by a double lter system consisting of an oversized main air lter and an
additional air lter.
Operation
Start the Honda gasoline engine with the attached reversing starter.
After starting, the stamping system starts to vibrate via the centrifugal clutch which is attached to
the engine. Use the gas lever to vary the engine speed between idle speed and full-throttle speed.
For easier transport the tamper can be pushed onto or into a means of transport.
To Next Page
Loading...
