Weber E-670 User Manual

WWW.WEbER.com
®
23
6 bURNER
SEAR mETHoD
Food is placed in the area of intense heat between the lit burners.
4
2
1
3
The grill illustrated may have slight
differences than the model purchased.
SEAR STATION
®
BURNER MANUAL IGNITION
m DANGER
Failure to open the lid while igniting the barbecue’s burners,
or not waiting five minutes to allow the gas to clear if the
barbecue does not light, may result in an explosive flare-up
which can cause serious bodily injury or death.
The Sear Station
®
burner, has an on or off control setting. To ignite the Sear Station
®
burner,youmustfirstignitethetwoadjacentmainburners.
Adjacent Main Burner Snap Ignition
Note: Each main burner control knob snap igniter creates a spark from the igniter
electrode to the burner lighting tube. You generate the energy for the spark by pushing
in the control knob and turning it to START/HI. This will ignite each individual burner.
A) Open the lid (1).
B) VerifyeachmainburnerthatisadjacenttotheSearStation
®
is lit by visual
inspection of a flame (2).
C) Put match in the matchstick holder and strike match.
m WARNING: Do not lean over open barbecue.
D) Insert matchstick holder and lit match down through cooking grates and Flavorizer
®
bars to ignite the Sear Station
®
burner (3).
E) Push the Sear Station
®
control knob in and turn it to the ON position (4).
m WARNING: If the burner does not light, turn the burner
control knob to OFF and wait five minutes to let the gas
clear before you try again.
Note: See “MAINTENANCE” for burner removal and cleaning
procedure.
◆
TO EXTINGUISH
Push in and turn each burner control knob clockwise to OFF position. Turn gas supply off
at the source.
◆
USING THE SEAR STATION
®
Your Weber
®
gas barbecue includes a sear burner for searing meats such as steak,
poultry parts, fish, and chops.
Searing is a direct grilling technique which browns the surface of the food at a high
temperature. By searing or browning both sides of the meat, you will create a more
desirable flavor by caramelizing the food surface. Searing will also enhance appearance
of the meat with sear marks from the cooking grates. This, along with the contrast of
textures and flavors, can make food more interesting to the palate.
The Sear Station
®
burner has an on or off control setting that works with the two
adjacentmainburners.Withthesearandadjacentburners,youcaneffectivelysear
meats while using other cooking areas for grilling with moderate heat.
Before searing food, you should turn all of the main burners on HI for 15 minutes to
preheat the grill. Note: Always grill with the lid closed to allow for maximum heat and to
avoid flare-ups.
Once the grill is preheated, turn the outer burners off or down to low. Leave the center
two burners on HI and ignite the Sear Station
®
burner.
Place the meat directly over the Sear Station
®
. You will sear each side anywhere from
one to four minutes, depending on the type and thickness of the meat. You may turn the
food a quarter turn to make crossing sear marks (1) before you sear the other side in the
same manner.
Once you are done searing the meat, you can finish grilling it by moving it to a more
moderate heat over the outside burners to achieve the desired doneness.
As you gain experience in using your Sear Station
®
, we encourage you to experiment
with different searing times to find results that work best for your taste.
◆
1
SEAR STATIoN
®
IGNITIoN & USAGE

Weber E-670 Specifications

General

Brand	Weber
Model	E-670
Category	Grill
Language	English