Weber GENESIS II E-310 - Hose Connection & Leak Checking

9
Getting Started
Hose Connection &
LeakChecking
Connect the Hose to the GasSupply
A quick-disconnect fitting connects your grill to
the gas supply. Gas will not flow unless the quick-
disconnect is properly engaged.
1) Check that all burner control knobs are in the o
position. Check by pushing in and turning knobs
clockwise (A).
2) Slide the collar of the quick-disconnect back (B).
3) Push male fitting of the hose into the quick-
disconnect and maintain pressure. Slide the collar
closed (C). If it does not engage or lock, repeat
procedure. Proceed to ”CHECKING FOR GAS
LEAKS”.
B
C
A