WWW.WEbER.com
®
29
IGNITIoN & USAGE
m
A) Open the lid .
B) Make sure all burner control knobs are turned OFF . (Push each knob in and turn
it clockwise to ensure it is in the OFF position.)
m
m
C) Turn the gas on by turning the cylinder valve counterclockwise .
D) Strike a match and put the flame into the matchlight hole under the igniter .
m
E) Push in the large control knob for the outside burner and turn it to START/HI .
F) Check that the burner is lit by looking down through the cooking grate . You
should see a flame.
m
G) After the outside burner is lit, you can turn on the inside burner. Push in the small
control knob and turn it to START/HI . The inside burner will then be ignited by
the outside burner.
◆
Push in and turn each burner control knob clockwise to the OFF position. Turn gas
supply OFF at the source.
◆