What does E7 error mean on Weber SMOKEFIRE EX4 Grill?
An E7 error on your Weber Grill indicates a motor failure. The barbecue will automatically run the shutdown procedure if the barbecue is still hot. Open the barbecue lid and wait until the barbecue has completed the shutdown procedure and completely cooled. Do not unplug the barbecue or power it off during the shutdown procedure.
What does E8 error mean on Weber Grill?
An E8 error on your Weber Grill indicates a thermocouple error. The barbecue will automatically run the shutdown procedure if the barbecue is still hot. Open the barbecue lid and wait until the barbecue has completed the shutdown procedure and completely cooled. Do not unplug the barbecue or power it off during the shutdown procedure.
What to do if my Weber SMOKEFIRE EX4 Grill has a start up failure?
If your Weber Grill fails to start, follow these steps: 1. Allow the barbecue to complete the shutdown procedure and cool down completely. Keep the lid open and do not unplug or power it off during this process. 2. Once cool, power off the grill and unplug it. 3. Open the lid and remove the cooking grates, FLAVORIZER BARS, heat diffuser, and heat baffle. 4. Clean the cookbox and burn pot of ash and debris, directing it into the ash and grease system. Ensure the ash is fully extinguished before cleaning. 5. Remove and clean any ash or grease from inside the ash and grease system. Once cleaned, reinstall the drawer. Replace disposable drip pans as needed. 6. Plug the barbecue into the power source and power on the barbecue. 7. Turn and push the dial on the controller to select 200°C ...
What does E5 error mean on my Weber SMOKEFIRE EX4 Grill?
The E5 error on your Weber Grill means the grill is too hot. If the grill is still hot, it will automatically run the shutdown procedure. Open the grill lid and wait until the grill has completed the shutdown procedure and completely cooled, without unplugging it. Once the shutdown procedure is complete, power off the grill and unplug it from the power source. Open the grill lid and remove the cooking grates, FLAVORIZER bars, heat diffuser, and heat baffle from the cookbox. Clean the cookbox and burn pot of any ash or debris. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars, and cooking grates inside the cookbox. Remove and clean any ash or grease from inside the ash and grease system. Once cleaned, reinstall the drawer and replace grease drip pans as needed. Plug the grill into t...
What to do if my Weber SMOKEFIRE EX4 displays E6 error?
If your Weber Grill displays an E6 error, if the grill is still hot, it will automatically run the shutdown procedure. Open the grill lid and wait until the grill has completed the shutdown procedure and completely cooled. Do not unplug the grill during this process. Once the shutdown procedure is complete, power off the grill and unplug it from the power source. Open the grill lid and remove the cooking grates, FLAVORIZER bars, heat diffuser, and heat baffle from the cookbox. Clean the cookbox and burn pot of any ash or debris. Remove and clean any ash or grease from inside the ash and grease system. Once cleaned, reinstall the drawer and replace grease drip pans as needed. Plug the grill into the power source and power on the grill. Turn and push the dial on the controller to select 400°...
Emphasizes reading all instructions before installing and using the appliance.
Details warnings about water, extension cords, temperature probes, and hopper levels.
Provides guidelines to prevent carbon monoxide poisoning and its symptoms.
Lists various warnings for safe grill operation, including outdoor use and clearances.
Outlines the voluntary warranty provided by Weber for defects in material and workmanship.
Introduces the controller for managing grill operations like startup and temperature settings.
Details the functions of the Dashboard, Selection Dial, Main Menu, and Cook Program.
Provides crucial safety guidelines for selecting an outdoor location for the grill.
Outlines routine checks and preparations required before each grilling session.
Guides users on downloading and registering the WEBER CONNECT app.
Lists essential steps for initial setup, including unpacking and initial component checks.
Details the initial steps for preheating and seasoning the grill for the first use.
Guides on using food temperature probes for precise monitoring and optimal cooking results.
Details the correct procedure for safely powering down and cooling the grill.
Explains the standard procedure for preheating the grill before each cooking session.
Explains how to select and customize guided cook programs for different foods.
Guides on connecting probes and setting desired temperatures or cook programs.
Explains the cause and solution for an Auger Jam error code (E1).
Guides on checking motor connections to resolve an E7 Motor Failure error.
Detailed step-by-step guide for manually clearing an E1 Auger Jam error.
Detailed instructions for replacing the glow plug assembly.
Troubleshooting steps for when the grill fails to power on, including fuse checks.
Step-by-step guide for replacing a blown fuse in the grill.
Details how to check fan connections to resolve an E2 Fan Error.
Provides steps to address an E3 error indicating the grill flame is out.
Details troubleshooting steps for E6 Start Up Failure, including glow plug checks.
Provides instructions for cleaning the fuel sensor window to clear E9 error.
General| Primary Cooking Area | 432 sq in |
|---|---|
| Temperature Range | 200-600°F |
| Fuel Type | Wood Pellets |
| Warranty | 5 years |
| Material | Porcelain-enameled steel |
To Next Page
