SRV62_66 11
2.2 Transport
For transporting the tamper over long distances, however, the
machine can be lifted on an appropriate transport vehicle (truck,
trailer) by means of a crane.
2.2.1 Loading by Crane
- Put the tamper out of operation as described in paragraph 2.7.
- Hang the crane hook into the transport bar (2/1).
Danger!
Only use a lifting tackle and a crane of a sufficient bearing
capacity.
Do not enter the zone under the suspended load.
2.3 Commissioning
Caution!
For commissioning, only carry out the pre-start work described in paragraph 2.4.
Keep to the initial maintenance intervals (refer to paragraph 3.2.1).
Figure 2
1
To Next Page
Loading...
