20 SRV62_66
3.2.2 Routine Maintenance
Maintenance Interval Maintenance
Item
Maintenance Work Remarks
Every 8 operating hours
Whole machine - Check for visible damage, leaks
etc.
Air filter - Clean the air filter cartridge,
check it for damage and, if
necessary, replace it
# 3.3.2
Engine - Check the engine oil level # 2.4.2
Engine
-
Check, and if necessary,
clean/replace the spark plug
# 3.3.4
- Change the engine oil
# 3.3.2
Every 100 operating hours
Whole machine
-
Check all screwed connections
for tight seat, if necessary
retighten them
All bare parts - Apply a slight film of oil
Engine
-
Check and if necessary replace
the fuel filter
# 3.3.3
- Clean the spark plug and adjust
the air gap
# 3.3.4
Every 350 operating hours
Lower tamper part - Change the oil # 3.3.5
Every 500 operating hours
Engine - Clean and if necessary adjust
the carburettor
Manual of the engine
manufacturer
- Clean the cylinder head "
- Adjust the valve clearance "
Whole tamper - Check all assembly groups for
visible damage and wear
- Remove dirt, old grease and rust
Every 50 operating hours
Every 200 operating hours
Every 1000 operating hours