pressure(I).Slidethecollarclosed(2).If itdoesnot
engageorlock,repeatprocedure.
Gaswillnotflowunlessthequickdisconnectisproperly
engaged.
barbecue was dealer or store assembled.
Turn on gas supply.
Check for leaks by wetting the connections with the soap
and water solution and watching for bubbles. If bubbles
form or if a bubble grows, there is a leak.
Note - Since some leak test solutions, including soap and
water, may be slightly corrosive, all connections should be
rinsed with water after checking for leaks.
/k WARNING: Do not ignite burners when leak
checking.
To Next Page
Loading...
