Problem
Side Burner does not light.
Flame is low in HIGH pOsition.
Push button ignition does not
work.
Does burn_
iiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Side Burner maintenance
should be in the OFF position.
(1)
1)
2) Venturi,
3) 1/8 to
/
(2)
Make sure wire is connected between igniter and
electrode. Check that igniter lock nut is tight.
Note: If the igniter works loose, carefully tighten the
igniter lock nut with an adjustable wrench or pliers.
Adjust igniter electrode to burner. Gap should be 1/8 to
3/16 inch from tip of electrode to burner. Spark should
be a white/blue color, not yellow.
Side
Side Burner Ring & Head
Igniter Electrode
Control
To Next Page
Loading...
