TECHNICIANS' manual 21 of 100
3. TRANSPORT AND HANDLING
3.1 Safety precautions
Carefully read the instructions provided in
chapter "I. SAFETY PRECAUTIONS" on page
3.
3.2 PPE features
When transporting the machine, the following PPE is required:
The use of protective gloves is mandatory.
The use of safety shoes is mandatory.
3.3 Dimensions and weight
Model 1GR COMPR. 2GR 3GR 4GR
Maximum
gross weight
77 kg 100 kg 104 kg 113 kg 130 kg
3.4 Handling the packed machine
Upon arrival, the machine must be unloaded and handled
with care, carefully following the instructions on the packag-
ing, or those contained in this Manual.
It is very important to check that the maximum
load capacity of each piece of lifting equip-
ment, is at least equal to the weight of the
loads to be lifted plus the safety margins which are re-
quired by current standards.
3.5 Unpacking the machine
Only remove the machine from its packaging when it is ready
to be installed, in order to prevent accidental collisions which
could damage it:
• Open the packaging, taking care not to damage the ma-
chine.
• Remove and take out the machine guards and equipment
inside the packaging.
• Remove the machine.
• Dispose of the packaging in compliance with the current
waste regulations.
After unpacking the machine, check that there
are no damaged parts due to transport or miss-
ing parts. Should there be any, immediately in-
form (no later than 7 days after delivery) both the CAR-
RIER and the MANUFACTURER, by indicating the
machine data and providing photographic evidence.
We recommend that you keep the packaging until the
guarantee has expired.
Wood, nails, staples, cardboard: non-polluting material
which must be recycled properly.
Plastic: polluting material that must not be burned (dan-
ger of toxic fumes), nor disposed of as normal waste; to
be disposed of according to current regulations.
To Next Page
Loading...
Need help?
General
