TECHNICIANS' manual40 of 100
6.12.2 “EVD” version
To use the cup warmer on this version of the machine, pro-
ceed as follows:
• Place the cups on the cup warmer (1) shelf of the coffee
machine.
• Turn the cup warmer switch (2) to the ON position.
2
1
To adjust the cup warmer temperature, proceed as follows:
• When the machine is switched on, press the
button
ontherightpushbuttonpanel:theashingLEDwillindi-
cate the current cup warmer setting, as indicated in the
images:
80°C
90°C70°C
Cup warmer
Disabled
• Hold down the
button until the LED on the panel
goesfromaashingtoasteadylight.
• Press the button that corresponds to the desired tempera-
ture.
• Toconrmtheselectedvalue,pressthe button.
6.13 Tips for a good cup of coffee
Wash the lters and lter holders on a daily basis, as indi-
cated in para. 7.7.3 on page 50. The failure to perform this
cleaning operation will negatively affect the quality of the
dispensed coffee.
To obtain high-quality coffee, it is important that the water
hardness does not exceed 6-7°f (French degrees). If the water
hardness exceeds these values, it is advisable to use a water
lter or softener. Avoid using a water softener if the water
hardness is less than 4°f.
If the taste of chlorine in the water is particularly strong, in-
stallaspeciallter.
Do not to keep large amounts of coffee beans on hand. If
you change the type of coffee, we recommend calling out
the Technician to adjust the water temperature and coffee
grinder.
If the machine has not been used for a certain period of time
(2-3 hours), carry out a few dry runs. Make sure that the ma-
chine is constantly cleaned and periodic maintenance is car-
ried out.
To Next Page
Loading...
Need help?
General
