Weider 1120 - Important Precautions

TABLE OF CONTENTS
WARNING DECAL PLACEMENT ............................................................. 2
iMPORTANT PRECAUTIONS ................................................................ 3
BEFORE YOU BEGIN ...................................................................... 4
ASSEMBLY .............................................................................. 5
ADJUSTMENTS .......................................................................... 17
WEIGHT RESISTANCE CHART .............................................................. 19
CABLE DIAGRAMS ....................................................................... 20
MAINTENANCE .......................................................................... 21
EXERCISE GUiDELiNES .................................................................. 22
ORDERING REPLACEMENT PARTS .................................................. Back Cover
LiMiTED WARRANTY .............................................................. Back Cover
Note: A PART iDENTiFiCATiON CHART and a PART LIST/EXPLODED DRAWING are attached in the center of
this manual. Remove the PART iDENTiFiCATiON CHART and PART LIST/EXPLODED DRAWING before begin-
ning assembly.
WARNING DECAL PLACEMENT
The decals shown here have been placed on
the weight system. If a decal is missing or illegi-
ble, please cal! our Customer Service
Department toll-free at 1-877-992-5999, Monday
through Friday, 8 a.m. until 6 p.m. Mountain
Time, to order a free replacement decal. Apply
the decal in the location shown.
Decal 1
Decal 2
1--This
decal is placed
on both sides
of the upright
oMisuseofthis product
may resuntin serious
injury.
Read user's manuan
and follow all warnings
and operating instruc-
tions prior to use.
Do notallow children
on or around machine.
Replace label if
damaged, ilbgible, or
removed.
DecaJ 2
WELDER is a registered trademark of iCON IP, Inc,
2