Weider CROSS BAR MAX User Manual

ATTACHINGTHEACCESBORmEB
Witha highpulleyattachedtotheresistancesystem
(seeATTACHINGTHEHUGHPULLEYSANDLEG
LEVERonpage13),attachaShortHandb(49)tothe
ShortCaMe(33)witha CabbCHp(51).
TheShortHandbs(49),LongHandbs(notshown),or
AnkbStrap(notshown)canbeattachedtotheLong
CaMe(80)witha CaMeCHp(51),AttachtheCudBar
(8)totheLegLever(7)witha CaMeCHp,Attachthe
LegPressStrap(notshown)tobothendsoftheLong
Cabb,ortheoptionaUUatbartotheShortCabbs(33),
withtwoCaMeCHps.
Note:AnoptionaUUatbarcanbepurchasedbycalling
ourCustomerServiceDepartmenttoll-freeat 1°877°
992°5999andaskingformodeUnumberWEMC0442,
ADJUSTINGTHERESISTANCE
Toaddresistance,hoUda"U"-channeUonthe10-
poundCenterResistanceBar(44)firmUyandpush
theendofa resistancebarunderit.Repeatwiththe
otherendoftheresistancebar.ifmoreresistanceis
needed,addoneresistancebarata time.
Note:Whenaddingresistance,alwaysstartwiththe
heaviestresistancebartobeused,andfinishwiththe
lightestresistancebar.Whenremovingresistance
barsfromthe"U'-channeb,startwiththelightest
resistancebarandfinishwiththeheaviest.
, WARNING: Whenaddingresist-
ance,make sure that both ends of the resist-
ance bar rest under the two "U'-channeis. l'he
rings on the RemovabJe Resistance Bars (36,
67) must be pushed against the Tray (35}. Do
not add or remove resistance bars from the
°'U'-ehanneJs while the end of the Long Cable
(80) {e pu{led out.
Note: The resistance system uses progressive resist-
ance, As the resistance bars begin to bend, the
amount of resistance will increase gradually, As the
resistance bars bend further, the resistance will
increase rapidly,
Additional resistance can be added to the resistance
system by calling our Customer Service toll-free at
1°877°992°5999 and asking for model number
WEMCO842 (lO0-pound Power Pak) or WEMCO942
(200-pound Power Pak),
8O
"U'-Channel
Resistance
Bars
14

Weider CROSS BAR MAX Specifications

General

Brand	Weider
Model	CROSS BAR MAX
Category	Fitness Equipment
Language	English