saved. You can create as many different head settings as you wish, limited only by
Description – This is the description of the configuration. It is
recommended that you give the configuration a description that
allows easy recognition of the settings.
Cycles to Tare – This indicates how many times a head can be
used in a combination before requiring a self-tare (a.k.a. zero). For
example, if you are running a durable plastic product, you can set
this to 0, which would never have the head self-tare. If you are
running a product that accumulates in a bucket, you might want to
set this to 15 so that it will self-tare often to compensate for product
build up in the bucket. (This is an Advanced Setting)
To Next Page
Loading...
