WeighPack Systems PRIMO COMBI - Page 80

80
January, 2017
CENTER CONE PARAMETERS
Displays the center cone parameters loaded into the PrimoCombi.
VIBRATOR
Displays the center cone vibrator Parameters loaded into the PrimoCombi. For details on each field
please refer to Center Cone Configurations.
 CENTER CONE MODE – Indicates the mode that the center cone is currently using.
 DELAY TO START (MS) – Indicates how much time the center cone will wait before starting.
 ON TIME – Indicates how long the center cone will be active for.
 STRENGTH – Indicates how strong the center cone will be.
 FREQUENCY – Indicates what the frequency of the center cone will be.
MOTOR
Displays the center cone motor Parameters loaded into the PrimoCombi. For details on each field please
refer to Center Cone Configurations.
 CENTER CONE MODE – Indicates the mode that the center cone is currently using.
 DELAY TO START (MS) – Indicates how much time the center cone will wait before starting.
 ON TIME – Indicates how long the center cone will be active for in the first direction.
 SPIN DIRECTION – Indicates in which direction the center cone will spin first.
 ON TIME – Indicates how long the center cone will be active for in the second direction.
 SPIN DIRECTION – Indicates in which direction the center cone will spin second.