81
January, 2017
HEAD PARAMETERS
Displays the head parameters loaded into the PrimoCombi. For more information please refer to Head
Configurations and Recipe Configurations.
FEEDER MOTOR SETTINGS
DELAY TO START (MS) – Indicates how much time the feeder
motor will wait before starting.
ROTATION ANGLE (°) – Indicates how many degrees the feeder
motor will rotate before starting the pause time.
OFFSET (°) – Indicates the number of degrees to offset the home
position of the stepper motor.
WEIGHER MOTOR SETTINGS
DELAY TO START (MS) – Indicates how much time the weigher
motor will wait before starting.
ROTATION ANGLE (°) – Indicates how many degrees the weigher
motor will rotate before starting the pause time.
OFFSET (°) – Indicates the number of degrees to offset the home
position of the stepper motor.
To Next Page
Loading...
