WEIHONG ELECTRONIC NcStudio V10 CCD System User Manual

5. To configure static IP for the camera, do the following:
1. Click . The dialog box GxGigeIPConfig pops up.
2. Click Refresh Devices to refresh the camera list in area ①.
3. Select the camera in the camera list.
4. Check Static IP and modify the IP address of the camera to the IP
address which is on the same subnet with your computer.
Attention: The IP address of the camera and your computer
must be on the same subnet and cannot conflict with IP
addresses of other terminals. Otherwise, communication
exception occurs.
WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
- 8 -

WEIHONG ELECTRONIC NcStudio V10 CCD System Specifications

General

Brand	WEIHONG ELECTRONIC
Model	NcStudio V10 CCD System
Category	Control Systems
Language	English