4. Connect industrial gigabit cable to the camera and the computer:
Installing Software of the Camera
To install software of camera, do the following:
1. Unzip the file DAHENG_MER_Series_Win_en.rar to a local directory.
2. Double click MER_Setup_cn.exe to initiate the installation procedure.
3. Follow the setup wizard to install the camera driver until end.
After the installation, two icons ( and ) appear on the desktop.
4. Open Control Panel → Network and Internet → Network and Sharing
Center → Local Connection → Details on your computer to check IP address,
subnet mask and gateway of your computer:
WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
To Next Page
Loading...