WEIHONG ELECTRONIC NcStudio V10 CCD System User Manual

3. (Optional) According to the desired cutting quantity and position, set arraying
related parameters.
4. Adding marking points. Click the cross icon on the tool bar, and replace the
marks with cross icon to add marking points.
Shooting points must be nearby the characteristic points or the marks.
5. Click Object → Toolpath to set tool compensation.
6. Frame check all contour and marking points, and right click the mouse, select
Group.
WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
- 35 -

WEIHONG ELECTRONIC NcStudio V10 CCD System Specifications

General

Brand	WEIHONG ELECTRONIC
Model	NcStudio V10 CCD System
Category	Control Systems
Language	English