WEIHONG ELECTRONIC Ncstudio User Manual

上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
Specialized, Concentrated, Focused 67
No.
Parameter
Parameter Name
Type
Remarks
47
DD_BKREF_DELT
A
MO difference
between
double-driving shaft
(MO: Machine Origin)
DOUBLE
The difference between the
double-driving shafts when they
arrive the machine origin after the
adjustment of the transom
(Y-axis), (only used in the
double-drive configuration)
48
FIXEDCYCLE_BA
CK
G73_G83 retract
amount
DOUBLE
The retract amount after each
peck in high speed deep hole
chip breaking drilling cycle
49
FIXEDCYCLE_OS
S
The direction of
G76_G87 oriented
spindle stop
INT
Orientation is only effective within
X-Y plane (G17)
0/1:(G17:+X/-X)
50
FIXEDCALI_REC
Z-axis workpiece
coordinate in fixed
tool measurement
DOUBLE
Recording the Z-axis workpiece
coordinate of tool nose when it
touches the tool presetter in fixed
tool measurement

WEIHONG ELECTRONIC Ncstudio Specifications

General

Brand	WEIHONG ELECTRONIC
Model	Ncstudio
Category	Controller
Language	English