Specialized Concentrated Focused
Machining Operations「47」
is as shown in Fig. 4-19.
Limit! Exit
M anually.
OK ESC
Fig. 4-19 Hard limit dialog
At this time, press [OK] to return to the main page under Jog mode, with Limit Rls. displayed at the
bottom right corner of the LCD, as shown in Fig. 4-20. Or you can press [ESC] to directly back to the
main page under Jog mode.
1X 15.617 Idle
1Y 551.107 SOff
1Z 9.900 Slow
Jog
Lim it Rls.
Fig. 4-20 Prompt interface of limit release
Move the machine tool away from the limit position, Limit Rls. disappearing. The main page returns to
its normal state.
To Next Page
Loading...
