WEIHONG NK280 - Page 102

上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
- 96 - Specialized, Concentrated, Focused
Parameter
Meaning
Setting Range
Pulse Equivalent of Z1-axis
It sets the pulse equivalent of Z1 axis.
0.0001~999
Pulse Equivalent of Z2-axis
It sets the pulse equivalent of Z2 axis.
0.0001~999
Z1-axis Workbench Upper
Limit
The upper limit of the workbench range in
Z1 axis.
-100~67108.8640
Z2-axis Workbench Upper
Limit
The upper limit of the workbench range in
Z2 axis.
-100~67108.8640
Z1-axis Workbench Lower
Limit
The lower limit of the workbench range in Z1
axis.
-67108.8640~0
Z2-axis Workbench Lower
Limit
The lower limit of the workbench range in Z2
axis.
-67108.8640~0
Z1-axis Change Tool
Range Upper Limit
The upper limit of change tool travel in Z 1
axis.
-100~67108.8640
Z2-axis Change Tool
Range Upper Limit
The upper limit of change tool travel in Z 2
axis.
-100~67108.8640
Z1-axis Change Tool Lower
Limit
The lower limit of change tool travel in Z1
axis.
-67108.8640~0
Z2-axis Change Tool Lower
Limit
The lower limit of change tool travel in Z2
axis.
-67108.8640~0
Z1-axis Output Direction
The output direction of Z1 axis. 1 for positive
direction and -1 for negative.
1;-1
Z2-axis Output Direction
The output direction of Z2 axis. 1 for positive
direction and -1 for negative.
1;-1
Max Turning Acceleration
The maximum feedrate at the corner.
0.001~100000(mm/s
2
)
Cali Process Type
0: with multiple fixed calibration block (fixed
tool presetter), Z axes calibrate together;
1: with only one fixed calibration block (fixed
tool presetter), Z axes calibrate in turn.
0;1
Force Homing (Double Z)
Whether to force Z1Z2 axes to return home.
Yes: valid; No: invalid
Reference Circle Speed
The maximal velocity of circle with 10mm
diameter. The value is used to calculate the
maximal velocity of circle.
-
Z1-axis Coordinate of
Fixed Point
It specifies the coordinate of Z1 axis of the
fixed point.
-67108.8640~67108.8
640
Z2-axis Coordinate of
Fixed Point
It specifies the coordinate of Z2 axis of the
fixed point.
-67108.8640~67108.8
640
Z1 Direction in Backing
Home
It specifies the Z1 direction in coarse
positioning when homing. 1 for positive and
-1 for negative.
-1;1
Z2 Direction in Backing
Home
It specifies the Z2 direction in coarse
positioning when homing. 1 for positive and
-1 for negative.
-1;1
Retract Distance of Z1-axis
The retracted distance of Z1 axis after
backing to the mechanical origin.
-
Retract Distance of Z2-axis
The retracted distance of Z1 axis after
backing to the mechanical origin.
-
Z1 Speed in Backing Home
Z1 feedrate in coarse positioning when
homing.
0.001~15000
Z2 Speed in Backing Home
Z2 feedrate in coarse positioning when
homing.
0.001~15000
Z1 Speed in Exact
Positioning
Z1 feedrate in fine positioning when homing.
0.001~15000
Z2 Speed in Exact
Positioning
Z2 feedrate in fine positioning when homing.
0.001~15000
Z1-axis Screw Pitch
It specifies the screw pitch of Z1 axis.
0.001~9999.9
Z2-axis Screw Pitch
It specifies the screw pitch of Z2 axis.
0.001~9999.9