上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
- 52 - Specialized, Concentrated, Focused
Press F7 to return to the previous screen.
SelectDistance, Deepen, Lift
Pressing the shortcut key F5 of ―SelectDistance‖ in Fig. 3-24 will change the value of ―Lift and
Deepen Height of Z-axis‖, with five options, which are 0.01mm, 0.10mm, 0.50mm, 1.00mm and 5.00mm.
Pressing the shortcut key F6 of ―Deepen‖ in Fig. 3-24 will move down Z-axis workpiece origin by ―Lift
and Deepen Height of Z-axis‖ distance. The moving distance will be accumulated accordingly with the
press times of F6.
Pressing the shortcut key F7 of ―Lift‖ will move up Z-axis workpiece origin by ―Lift and Deepen
Height of Z-axis‖ distance. The moving distance will be accumulated accordingly with the press times of
F7.
Both ―Deepen‖ and ―Lift‖ only modify public offset of Z-axis.
To Next Page
Loading...
