CP 20 ____________________________________________________________________Appendix B
Cleaning the Patient Cable
Patient cables should be kept clean using a damp cloth of lukewarm soapy water or a neutral cleaner. To disinfect
the patient cable, use a damp cloth of chemical disinfectants containing either:
• ethanol (70% - 80%)
• propanol (70% - 80%)
• aldehydes (2% - 4%)
WARNING: Do not attempt to clean/disinfect the CP 20 or patient cable(s) by submerging into a liquid,
autoclaving, or steam cleaning.
B-3
Never expose cables to strong ultra-violet radiation.
To Next Page
Loading...
