4. Slide this assembly into grooves into Printer/Charger, making sure
to insert paper into feed slot as shown. Push paper while de-
pressing feed button. The paper will be pulled in by the printer.
Continue depressing feed button until paper exits top of stand.
Feed Slot
Front View
Side View-indicating
possible loose areas.
5. Slide paper access door to the left until it snaps closed.
CAUTION: Ensure paper is taut before closing paper access
door. Loose paper can cause printer malfunction.
NOTE: Use only Welch
Allyn
paper
(#53600)
or Printer/Charger
life will be lessened and warrranty voided.
DISASSEMBLY OF PRINTER/CHARGER PRESENTS POSSIBLE
ELECTRICAL SHOCK HAZARD.
REFER ALL SERVICING TO QUALIFIED PERSONNEL TO
PREVENT POSSIBLE FIRE HAZARD.
20
To Next Page
Loading...
