Need help?Do you have a question about the Welch Allyn SureTemp Plus 692 Series and is the answer not in the manual?
General| Brand | Welch Allyn |
|---|---|
| Model | SureTemp Plus 692 Series |
| Category | Thermometer |
| Language | English |
Provides an overview of the manual's content, scope, and related documents.
Details critical safety precautions, warnings, and cautions for device operation and patient care.
Describes the main components of the SureTemp Plus thermometer and their basic functions.
Compares the specific features and differences between the SureTemp Plus Model 690 and 692.
Details the various operational modes, settings, and user interface elements of the thermometer.
Explains the energy-saving mode and the conditions under which the device enters it.
Describes the rapid temperature measurement mode and how it is used for different patient sites.
Details the continuous temperature monitoring capability and its activation.
Explains the pulse timer function and how to access Monitor mode on Model 692.
Describes the function and operation of the LCD backlight on Model 692.
Details the audible signals and tones used by the thermometer for user feedback and warnings.
Explains how to switch between Fahrenheit and Celsius temperature scales.
Describes how to view the most recently completed predicted temperature reading.
Details the mode for setting and checking special features and configurations of the thermometer.
Explains the anti-theft feature based on a count of temperature measurements.
Describes the security feature that alarms when the unit is removed from its holder.
Outlines the maintenance tasks recommended every six months for optimal device performance.
Details the preventive maintenance procedures recommended annually for the thermometer.
Provides guidelines for maintaining the thermometer during extended periods of non-use.
Explains the procedures for cleaning and disinfecting the thermometer and its components.
Specific instructions for cleaning the removable probe well.
Step-by-step guide for replacing the batteries in the thermometer.
Procedure for verifying calibration using a fixed value Cal-Key.
Procedure for verifying calibration using the Model 9600 Plus Calibration Tester.
Categorizes and describes common error indications displayed by the thermometer.
Explains specific error messages and symbols related to battery status.
Describes errors occurring when the ambient temperature is outside operational limits.
Details errors related to patient temperatures falling outside the acceptable measurement range.
Explains error codes and indications associated with probe malfunctions or issues.
Describes errors resulting from internal circuitry failures or test failures.
Provides a table of error codes, their descriptions, and recommended troubleshooting steps.
Provides a high-level explanation of how the SureTemp Plus thermometers function.
Details the components and function of the thermometer's temperature probes.
Explains the optical LED probe switch and its role in power saving.
Describes the battery power source, expected battery life, and handling.
Explains the circuit that detects low battery levels to prevent erroneous readings.
Details how temperature is measured using thermistors and displayed on the LCD.
Provides information on electromagnetic compatibility and precautions for medical electrical equipment.
Specifies immunity test levels and guidance for electromagnetic environments.
Details recommended separation distances for RF communications equipment to prevent interference.
To Next Page