EasyManua.ls Logo

Welch Allyn MicroTymp - Probe Tip Handling

Welch Allyn MicroTymp
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tips
Will withstand cleaning or sterilization by any one of the following:
Ethylene Oxide
(13O”F,
8 PSI. 4 hr. cycle)
gt~~
Autoclave
(27O”F,
27 PSI. 6 min. cycle)
Cidex 7
70% Isopropyl Alcohol
Betadine
(10% by volume)
Wescodyne (10% by volume)
Boiling water (30 min.)
NOTE: Zepharin Chloride (with or without anti-rust tablets) is not
recommended. The use of Betadine, Wescodyne or boiling water
may discolor tips; however, performance is not affected.
CAUTION: If the tips are wiped while attached to the instru-
ment, the probe tip should be pointed down to prevent seepage
of liquid into probe tip.
38

Related product manuals