Page 7
MIG 120 GAS / GASLESS
SPECIFICATIONS
Mains Voltage 230—400V
Welding Current 40—170 Amps
Minimum Electrode 1.6 mm
Maximum Electrode 4.0 mm
Weight 26.5 Kg
ACCESSORIES
Torch Cable
Work Clamp
Hand Held Face Mask
Combination Chipping
Hammer with Wire Brush
Instructional DVD
Gasless Welding Wire
FEATURES
ANTI-SHOCK CLAMP
10 AMP SINGLE PHASE
THERMOSTATIC CONTROL EUROPEAN CONFORMITY
ANTI-SCRATCH PAINT
FLUX CORED WIRE
PORTABLE WIRE SPEED REGULATOR
FAN
WIREFEEDER 2 REELS
DIRECT CONNECTION TORCH NO VOLTAGE ON TORCH
POWER GENERATOR SAFE
NOTE: This welder is a dual purpose gas / gasless machine. Refer to the table on
page 18 for the gas required.
To Next Page
Loading...
