Page 14
OPERATION–Feeding the Welding Wire
For the MIG 100, MIG 120 and MIG 160
Unwind the welding wire and feed it through the
plastic guide tube.
For the MIG 100, MIG 120 and MIG 160
Unscrew welding wire clamp nut.
For the MIG 100, MIG 120 and MIG 160
Align the welding wire to the feed rollers and
continue feeding the welding wire through the
intake tube.
For the MIG 100, MIG 120 and MIG 160
Tighten the welding wire clamp nut to fasten the
welding wire into position.
MIG 120 and MIG 160
Wire feed access from side panel.
To Next Page
Loading...
