ATA-171/172/171P/171M (ATA-S1/S2/P/M)
User’s Guide
52
-9- auth function
Index Command Description
1 ? Show 'auth' Option
2 -admin Change Administrator user name/password
3 -sys0 Change System user0 user name/password
4 -sys1 Change System user1 user name/password
5 -sys2 Change System user2 user name/password
6 -sys3 Change System user3 user name/password
7 -sys4 Change System user4 user name/password
8 -norm0 Change Normal user0 user name/password
9 -norm1 Change Normal user1 user name/password
10 -norm2 Change Normal user2 user name/password
11 -norm3 Change Normal user3 user name/password
12 -norm4 Change Normal user4 user name/password
13 -ppp Change PPP user name/password
14 (null) Show auth Setting
In each item includes
Index Command Description
1 ? Show 'auth' Option
2 -user Change User Name.'auth -sys3 -user xxx '
3 -pass Change Password. 'auth -sys3 -pass xxx xxx'
4 (null) Show auth's System/PPP Setting
If you want to change the password, you need to type the password twice in the CLI.
-10- nat function
Index Command Description
1 ? Show 'nat' Option
2 -vs Set 'nat -vs' Option
3 -dmz Set 'nat -dmz' Option
4 (null) Show NAT Setting
In DMZ item includes
Index Command Description
1 ? Show 'nat -dmz' Option
2 on EnableDMZ
3 off EnableDMZ
4 -ip Set DMZ IP address
5 (null) Show DMZ Setting
-11- dns function
Index Command Description
1 ? Show 'dns' Option
2 -q DNS query. dns -q domain-name
3 (null) Show DNS Table
-12- ping function
Index Command Description
1 ? Show 'ping' Option
2 -l ping [-l N] [IP-addr|host-name]
3 (null) ping [IP-addr|host-name]
To Next Page
Loading...